Foundation Crack Repair & Waterproofing System You Can Trust
For over 12 years Crack Buster has been servicing the Edmonton, Sherwood Park, and St Albert Areas with quality NO DIGGING crack repair. We offer a life time warranty on all our repairs, and use a specialized system to ensure the crack is repaired quickly and efficiently.
Still having second thoughts? Check out what our valued clients have to say!
See TestimonialsCRACK INJECTION
Crack injection works by filling the full width and length of the crack with an expanding polyurethane foam. This is a permanent repair and does not have to be repeated. Unlike other surface repairs, the injected polymers are not exposed to weathering, traffic, or ultraviolet rays.
Most importantly, injection of the cracks will prevent expensive repairs and problems in the future. Potential damage done by water leaks to the finished basement or cost of repairing concrete walls caused by corrosion show the clear advantages of permanent crack repair. Injection is the best repair of poured concrete walls.
POLYURETHANE INJECTION
Polyurethane is especially formulated for concrete repair, expanding upon contact with special liquid to fill the crack. As the foundation continues to shift, the polyurethane remains flexible, thus stopping the leak permanently. Foundation Concrete Crack Repair is done from the inside, making digging from the outside unnecessary. Holes are drilled along the crack through the soil and polyurethane is then injected.
EPOXY INJECTION
Epoxy Injection is recommended only for structural purpose, and even then only if the concrete is dry.
HOW FOUNDATION CRACKS DEVELOP
Cracks can be found in almost all residential foundations. Often, they will occur in corners of windows, pour lines, holes for service lines or rod ties. The various causes include:
- HIGH WATER CONTENT RESULTING IN POOR CONCRETE MIX
- RAPID CURING OF CONCRETE
- CONCRETE FORMS REMOVED PREMATURELY (I.E. 2 DAYS VS 7)
- FILL SOIL BEING IMPROPERLY COMPACTED
- UNEVEN MOISTURE AROUND THE FOUNDATION
- POOR DRAINAGE
- HYDRO-STATIC WATER PRESSURE
All houses will settle, but because soil properties vary, not every point on a foundation will settle uniformly, thus causing cracking walls and racking door frames. Good construction will minimize overall settlement and prevent differential settlement.
In time, even small cracks will grow larger and can cause BIG problems like loss of structural integrity. All cracks that may be or are exposed to moisture need to be repaired as quickly as possible to avoid extensive damage.
TYPES OF BASEMENT CRACKS
HAIRLINE CRACKS
Most foundation cracks will appear within the first year of being built. Common wall cracks do not pose any structural concerns, or failure of foundation. The biggest problem with these, is water leakage.
VERTICAL CRACKS
Typical foundation cracks run vertically or at an angle, this is caused by the shrinking of the concrete as it cures, this is true with settlement.
HORIZONTAL CRACKS
If the crack is at the mid point of the wall, it is subject to lateral pressure, causing the wall to bow and damage the wall structurally.
Cracks more than 1/4” wide, horizontal cracks, cracks with misaligned edges or continued movement may require an engineer assessment. Monitor the cracks length and movement by marking the ends of the crack and making alignment marks at various points on the wall.
Crack injection works by filling the full width and length of the crack with an expanding polyurethane foam. This is a permanent repair and does not have to be repeated. Unlike other surface repairs, the injected polymers are not exposed to weathering, traffic, or ultraviolet rays. Most importantly, injection of the cracks will prevent expensive repairs and problems in the future. Potential damage done by water leaks to the finished basement or cost of repairing concrete walls caused by corrosion show the clear advantages of permanent crack repair. Injection is the best repair of poured concrete walls.
Foundation Inspection
Crack injection works by filling the full width and length of the crack with an expanding polyurethane foam. This is a permanent repair and does not have to be repeated. Unlike other surface repairs, the injected polymers are not exposed to weathering, traffic, or ultraviolet rays. Most importantly, injection of the cracks will prevent expensive repairs and problems in the future. Potential damage done by water leaks to the finished basement or cost of repairing concrete walls caused by corrosion show the clear advantages of permanent crack repair. Injection is the best repair of poured concrete walls.
Polyurethane is especially formulated for concrete repair, expanding upon contact with special liquid to fill the crack. As the foundation continues to shift, the polyurethane remains flexible, thus stopping the leak permanently. Foundation Concrete Crack Repair is done from the inside, making digging from the outside unnecessary. Holes are drilled along the crack through the soil and polyurethane is then injected.
Epoxy Injection is recommended only for structural purpose, and even then only if the concrete is dry.
- Life Time Guaranteed and Transferable
- No Digging
- Free Quotes
Get a free quote and experience our transparent demolition process.
- Client Testimonials
We are committed to client satisfaction and provide reliable demolition services.
- Certified Professionals
We are fully licensed, insured, and employ certified demolition professionals.
